Mass Transfer Lab Apparatus

Approx. Rs 50,000 / PieceGet Latest Price

We are the leading organization engaged in providing excellent quality Adsorption in Packed Bed. The offered apparatus is manufactured by the skilful workforce under strict guidelines. Our apparatus are broadly praised for their premium quality and can be customized as per the needs of customers.

Features:

• Compact design
• Durable finish standard
• Reliability

Utilities Required:

• Water Supply & Drain
• Electricity Supply: IN Phase, 220VAC, 1.5kW
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted

Product Details:

Approx. Rs 50,000 / PieceGet Latest Price

The set-up is designed to demonstrate and stimulate the moisture removal by heat under natural draft action created by hot air stream. The set-up consists of an insulated double wall chamber. Inside the chamber a tray is attached directly to an electronic weighing balance, which is fitted on top outside the chamber. Material for drying is placed in the tray and regular loss of weight is monitored. Air works as the drying agent by natural action removes the moisture from the tray by passing towards the top openings. A digital temperature controller is used to control and measure the temperature of air stream.

Experiments:

• Determination of rate of drying of wet sawdust under different conditions of temperature

Product Details:

• Superb Painted structure
• Simple to operate & maintain
• Compact & stand alone set up

Utilities Required:

• Electric supply Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for weighing scale, 15A, three pin socket with switch for heater
• Material Saw dust @ 1Kg
• Support table Size: 500W x 500D x 750H in mm

Approx. Rs 50,000 / PieceGet Latest Price

The set-up is designed to demonstrate and stimulate the moisture removal by heat under forced draft action created by hot air stream. The set-up consists of an insulated double wall chamber. Inside the chamber a tray is attached directly to an electronic weighing balance, which is fitted on top outside the chamber. Material for drying is placed in the tray and regular loss of weight is monitored. Air from blower passes through heating chamber to produce hot air works as the drying agent entered from one side of the chamber and leave the chamber from other side removes the moisture from the tray. An arrangement is made to vary and measure the airflow rate. A digital temperature controller is used to control and measure the temperature of air stream.

Experiments:

• Determination of rate of drying of wet sawdust under different conditions of temperature and air flow

Features:

• Superb Painted structure
• Simple to operate & maintain
• Compact & stand alone set up
• Utilities Required

Electric supply Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for weighing scale, 15A, three pin socket with switch for heater.

• Material Saw dust @ 1Kg
• Anemometer Air flow measurement

Approx. Rs 50,000 / PieceGet Latest Price

The set-up is designed to demonstrate and stimulate the moisture removal by heat under forced draft action created by hot air stream and shower of moist solid due to rotary action of dryer drum.The set-up consists of a long cylindrical shell slightly inclined towards the outlet rotating at low RPM. Counter current hot air from blower passes through heating chamber to produce hot air works as the drying agent entered from one side of the rotating shell and leave from other side removes the moisture from the moist solids. High moisture content feed enters from one end of the shell and low moisture content product discharges from the other end of shell. As the shell rotates internal flights lift the solids and shower them down through the interior of the shell. This action increases the contact of wet solid against hot-air making the dryer very effective.

An arrangement is made to vary and measure the airflow rate. A digital temperature controller is used to control and measure the temperature of air stream.

Experiments:

• To study the operation of a Rotary Dryer
• To study the drying characteristics of a solid material under batch drying condition in a rotary dryer

Product Details:

• Superb Painted structure
• Simple to operate & maintain
• Compact & stand alone set up

Utilities Required:

• Electric supply Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for weighing scale, 15A, three pin socket with switch for heater
• Material Saw dust @ 1Kg. Granular and free flowing solid of size I - 2 mm
• Anemometer Air flow measurement