- 32liter/mm 0.25 hp I) Single Stage.
ii) Double Stage.
- 50liter/mm 0.25 hp I) Single Stage. ii) Doubles Stage
- 75liter/mm 0.25hP I) Single Stage. ii) Double Stage
- 100liter/mm 0.50hp I) Single Stage ii) Double Stage
- Vacuum Gauge with regulator.
- Belt guard
- Moisture Trap.
- Non-returnable value.
- Air Ballast.
|Temperature Range||121-134 Degree Celsius|
|Pressure Range (psi)||10-20 psi|
|Power Consumption (KW)||2-6 KW|
|Material||Stainless Steel, Mild Steel|
|Chamber Volume (Litre)||22-152 Litre|
|Insulation Wall||Double Wall|
|Automation Grade||Semi Automatic, Fully Automatic, Manual|
|Mount Type||Floor Mounted Autoclave, Table Top Autoclave|
|Approval Certificate||ISO : 9001 : 2008|
A versatile, electrically heated sterilizer under saturated steam of adjustable pressure of 10 to 20 psi. Double walled construction with boiler & steam jacket made of thick stainless steel and gap is filled with high grade glass wool to bring the temprature Loss to a minimal level. The outer chamber is made out of thick mild steel.The lid is made of thick stainless steel plate (joint less) or gunmetal plate and can be sealed by a jointless neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover. Provided with dial pressure gauge, air/ steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy + 3 psi. A drain cock has also been provided. A double safety valve has also been provided along with inlet. Supplied complete but without dressing bins.
Other Details :
- Dia x Depth
- Automatic Low-Water Level Cut Off- Device.
- Pressure Control Switch.
- Water Lever Arrangement.
- Dressing Bins For Various Size.
Hot Air Oven
Minimum Order Quantity: 5 Pieces
- High performance
- Strong design
- Long working life
Minimum Order Quantity: 1 Piece
- Industry proven design
- Minimal maintenance
- Temperature is controlled by a sensitive thermostat from 5oC to 50oC + 1oC.
- equipment is workable on 220 V AC 50 Hz single phase.
Inner chamber sizes in mms:
Capacity in cft.
610x455x410 (24" x 18"x 16") 4.00
825x500x415 (33" x 20" x 16.6") 6.1
865x565x565 (34.6" x22.6" x 22.6") 10.0
900x650x575 (36" x 26" x 23") 12.0
Timer 0-24 hours day night cycle.
Co2/air mixer nozzle is provided.
Internal illumination with 3 fluorescent tubes.
Digital temp. Indicator- Cum –Controller.
Automatic Voltage Stabilizer 3-5 KVA recommended must
Minimum Order Quantity: 1 Piece
- Application specific design
- Maintenance free
- Trouble free performance
- Temperature range 5oC above ambient to 80oC + 2oC controlled by a thermostat.
- The equipment is workable on 220 V AC 50 Hz single pahse.
- Heating is achieved from 3 sides.
Chamber size in mms. & Inches
- 300 x 300 x 300 (12" x 12" x 12")
- 350 x 350 x 350 (14" x 14" x 14")
- 400 x 400 x 400 (16" x 16" x 16")
- 450 x 450 x 450 (18" x 18" x 18")
- 600 x 450 x 450 (24" x 18" x 18")
- 600 x 600 x 600 (24" x 24" x 24")
- 900 x 600 x 450 (36" x 24" x 18")
- 900 x 600 x 600 (36” x24” x 24”)
- 900 x 900 x 900 (36" x 36" x 36")
- Air Circulating fan.
- Timer 0-24 hours.
- Imported Thermostat “EGO”/ “JUMO” German with the accuracy of ±1°C.
- Digital temp. Indicator- Cum – Controller.
- Digital Temp. Indicator.
Water Still Stainless Steel Wall Hanging
We are ranked amongst the foremost firms, engaged in offering a qualitative range of Water Still Stainless Steel Wall Hanging (Manasty Type). These products are manufactured by our experts using high grade material and latest technology in compliance with international standards. Our esteemed clients can avail these products from us in various customized options. In addition to this, we provide our entire range in different specifications to meet the varied needs of clients.
- Sturdy design
- Rust proof
- Enhanced durability
- Fitted with automatically ejection device which operates automatically when water vessel gets dried.
- The baffle cup and condenser are made of stainless steel sheet.
OUTPUT CAPACITY (Approximately)
- Output 2/3 litres per hour.
- Output 3/4 litres per hour.
- Output 5/6 Liters per hour.
Body in made of one-piece aluminum and is logged with special mineral wool. The panel is provided with on-off switch, energy control knob, pilot lamp etc. Provided with jointless hand knitted heating nets of glass yarn capable of withstanding high temperature upto 400oC. Single supplied complete with cord & plug to work on 220 V AC 50 Hz single phase. Single circuit system has been adopted.
- 50ml 60
- 100ml 60
- 250ml 150
- 500ml 200
- 1 liters 300
- 2 liters 450
- 3 liters 450
- 5 liters 600
- 10 ltrs 2x500
Water Still Table Model
Fostered with rich industry experience and a highly experienced team of professionals, we are offering Water Still Table Model (Barnstead Type). Our offered range is manufactured at our ultra-modern manufacturing unit using quality-tested raw material and progressive technology in synchronization with defined industrial norms. Moreover, these products are checked by our quality inspectors on various parameters. Besides, clients can avail the entire range from us at the market-leading prices.
- Finely finished
- Precisely designed
- Corrosion resistance
- Double wall construction having both made out of highly polished stainless steel sheet.
- The gap between the two is filled with glass wool for heat insulation. It is easy to handle table model working on 220 V AC 50 Hz single phase.
- Output approx. 4/5 liters per hour.
- Output approx. 8/9 liters per hour.
- Output approx. 25/26 liters per hour.
Water Still Wall Hanging
Casted aluminium vessel is electrically operated for getting pyrogen-free distilled water automatically. Wall hanging space saving arrangement is provided. The condenser is seamless. Fitted with automatically ejection device which operates automatically when water vessel gets dried. The baffle cup and condenser are made out of thick stainless steel sheet.
Output Capacity (Approx).
- Output Approx. 2 Liters per hour.
- Output Approx. 3 /4 liters per hour.
- Output approx. 5 / 6 liters per hour.
Rectangular Muffle Furnace
Minimum Order Quantity: 3 Pieces
Outer shell made out of thick mild steel duly finished in attractive stoving enamel paint. Fitted with grooved refractory for supporting the heating elements made out of kanthal wire and are easily replaceable. Maximum temp. 1000oC with working temp. 940oC controlled by SUNVIC energy regulator.
Other details :
Inner Muffle size in mm & Inches
- 225x100x100 (9”x4’x4”)
- 250x125x125 (10”x5”x5”)
- 300x125x125 (12”x5”x5”)
- 300x150x150 (12”x6”x6”)
- 300x200x200 (12”x8”x8”)
- 350x175x125 (14”x7”x5”)
- 475x175x125 (19”x7”x5”)
- 450x225x225 (18”x9”x9”)
Laboratory Hot Plates are available in round and rectangular shapes. Body is fabricated out of thick mild steel sheet duly finished in stoving enamel paint. The hot plate made of cast iron, nicely & Precisely machined & smoothed duly finished in heat resistant black paint is firmly mounted on the body. Heavy duty heating elements are securely layed under the plate to operate on 220 V AC 50 Hz single phase. Temp. is controlled by a three-heat rotary switch along with an indicator lamp for the mains and cord & plug.
- HOT PLATE : (ROUND) Single: Specifications as above with 20 cm (8”) dia. Moulded top.
- HOT PLATE (Round) Double: As above but with two plates of 20 cm (8”) dia. having independent pilot lamps & switches
- HOT PLATE (Rectangular): Specifications as above but plate is rectangular in shape.