- Home
- ยป
- Our Products
- »
- Mechanical Lab Equipments
Mechanical Lab Equipments
Adsorption in Packed Bed
Features:
- Compact design
- Durable finish standard
- Reliability
Utilities Required:
- Water Supply & Drain
- Electricity Supply: IN Phase, 220VAC, 1.5kW
- Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted
Product Details:
Product | Adsorption Setup |
Reactor Column | Material Borosil Glass, different diameter with different height of packing (3 Nos.) |
Feed Tank | Material Stainless Steel, Capacity 20 Litres., feed lines, drain valve etc. (1 Nos.) |
Receiving Tank | Material Stainless Steel, Capacity 20 Litres (1 Nos.) |
Feed Circulation | By pump, Magnetic drive made of Polypropylene (1 Nos.) |
Flow Measurement | Rota-meter 1 Nos. (for feed) |
Feed Piping | PVC/SS size |
Stop Watch | Electronic |
Control Panel | On off switch, Mains Indicator etc. |
The setup is painted with good quality paints & mounted on a strong support. |
Transmission Line Demonstration Panel Trainer
3 Phase Over/Earth Fault Relay Static type, Digital Moving Iron Voltmeter, Ammeter, MCB Switch, 3 Phase Transformer and Line Impedance.
Water Cooling Trainer System
DESCRIPTION:-
This unit consists of a hermetically sealed compressor with air cooled condenser. A capillary is next to condensers followed by medium temperature evaporators. Electrical energy supplied to the compressor can be measured by energy meter. This Test Rig is used to perform the following experiments.
EXPERIMENTS:-
ü To determine COP of unit.
Venturi Meter Orifice Meter Apparatus
Our technical expertise enables us to manufacture and supply a high quality assortment of Venturi Meter Orifice Meter Apparatus. This apparatus is designed with premium quality material under the guidance of experts. Our apparatus is use to determine the co-efficient of discharged by Venturimeter. We are offering this apparatus at very affordable rates.
Features:
- Strong design
- Optimum quality
- Low maintenance
Experiments:
- To determine the co-efficient of discharged through Venturimeter and orifice meter
- To measure discharge through Venturimeter and Orificemeter as flow meters
Utilities Required:
- Electric supply 0.5 kW, 220V AC, Single Phase
- Water supply Tap water connection ” BSP Distilled water @ 60 liters (optional)
- Floor Area with Drain facility
Bernoullis Theorem Apparatus
The setup is designed to verify Bernoulli's Theorem experimentally Set up consists of a one piece clear acrylic test section with convergent and divergent part sections, supply thank, measuring tank, inlet water tank and pump for closed loop water circulation. The test section is connected to Piezometer Tubes through pressure tapping at different locations on the section to demonstrate the Bernoulli’s Theorem. The flow rate of water is measured using measuring tank and stop watch provided.
Experiments:
- To verify Bernoulli's Theorem experimentally
Utilities Required:
- Electric supply 0.5 kW, 220V AC, Single Phase
- Water supply Tap water connection ” BSP Distilled water @ 60 liters (optional)
- Floor Area with Drain facility
Bernoulli's Theorem Apparatus
Features:
- Hassle-free operation
- Precision-engineered
- Outstanding performance
These Apparatuses Help Clients To Understand Following:
- Study of pipe fittings
- Orifice and mouthpiece
- Role of friction in the pipelining
- Effect of height in pipelining
Highlights:
- Free flow of water inside the pipe setup
- Easy to handle and understand
- Low maintenance required
- Long lasting life
- Made of robust quality materials
- Equipped with well regulated meters and controllers
Natural Draft Tray Dryer Apparatus
Experiments:
- Determination of rate of drying of wet sawdust under different conditions of temperature
Product Details:
- Superb Painted structure
- Simple to operate & maintain
- Compact & stand alone set up
Utilities Required:
- Electric supply Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for weighing scale, 15A, three pin socket with switch for heater
- Material Saw dust @ 1Kg
- Support table Size: 500W x 500D x 750H in mm
Forced Draft Tray Dryer Apparatus
Experiments:
- Determination of rate of drying of wet sawdust under different conditions of temperature and air flow
Features:
- Superb Painted structure
- Simple to operate & maintain
- Compact & stand alone set up
- Utilities Required
Electric supply Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for weighing scale, 15A, three pin socket with switch for heater.
- Material Saw dust @ 1Kg
- Anemometer Air flow measurement
Domestic Refrigerator Test Rig
TECHNICAL SPECIFICATION: -
- Compressor: 1/5 Tone, Hermetically sealed compressor, Make Emersion –Copeland/equivalent. Tecumseh India.
- Refrigeration : Freon R – 134
- Condenser : Coiled Tube Heat Exchanger acts as a condenser.
- Expansion device : Capillary type.
- Evaporator coil : Coiled Tube Heat Exchanger copper coil.
- Energy Meter : One each for power measurement of compressor & heater.
- Pressure Gauge : 2 Nos. for H.P., L.P. measurement
- HP/LP cutout : 1 No. to suit compressor.
- Service valve needle type : 2 No.
- MS Plate : The unit shall be assembled on MS heavy duty sheet.
- Voltage : Single Phase 220 Volts 50Hz. AC Supply
- Manual : Operation and maintenance manual should be provided
along with the supplied equipment
Heat Transfer Forced Convection
Features:
- Long working life
- Light weight
- Durable finish standard
Experiments:
- To determine average surface heat transfer coefficient for a pipe losing heat by forced convection
- Comparison of heat transfer coefficient for different airflow rates and heat flow rates
- To plot surface temperature distribution along the length of pipe
Utilities Required:
- Electricity Supply: 1 Phase, 220 V AC, 10Amp
- Floor area of 1.2m x 0.5m
Flow Over Notch
Brand | SMEI |
Product Details:
- High quality materials used
- Highly stable
- Extremely durable
- Reliable results
- Hassle free flow of water all over the setup
- Robust shape
Friction Pipe Lines Apparatus
We introduce ourselves as an eminent manufacturer, trader and supplier of Friction Pipe Lines Apparatus. This pipe line apparatus is highly demanded in the competitive markets of the day. We customized our pipe line apparatus as per market preferences. Offered pipe line apparatus is checked on quality provisions for supplying a flawless range.
Features:
- Durable
- Flawlessly finished
- Less maintenance
Experiments:
- To determine the losses due to fiction in pipes
Utilities Required:
- Electric supply 0.5 kW, 220V AC, Single Phase
- Water supply Tap water connection ” BSP Distilled water @ 60 liters (optional)
- Floor Area with Drain facility
Flow Over Notch Apparatus
Features:
- Long life
- Hassle-free performance
- Minimal maintenance
Experiments:
- To determine co-efficient of discharge using different notches
Utilities Required:
- Electric supply 0.5 kW, 220V AC, Single Phase
- Water supply Tap water connection ” BSP Distilled water @ 60 liters (optional)
- Floor Area with Drain facility
1 Cylinder 4 Stroke Petrol Engine Test Rig
Features:
- Application specific design
- Enhanced quality
- Long service life
Experiments:
- 1 Study of engine performance for power, efficiencies, fuel consumption, air fuel ratio
Utilities Required:
- Electric supply: Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. (Neutral – Earth voltage less than 5 VAC)
- Space: 3300L x 2900W x 1700H in mm
- Fuel, oil: Petrol: @ 10 liter, Lubricating oil: @ 1 liter (20W40)
Petrol Engine Test Rig
Features:
- Elevated service life
- Application specific design
- Enhanced performance
Experiments:
- Study of engine performance for power, efficiencies, fuel consumption, air fuel ratio and heat balance
- Morse test
Utilities Required:
Electric supply: Provide 230 +/- 10 VAC, 50 Hz, single phase electric
Forced Convection Apparatus
Product Details:
- Test pipe- 32mm N B G.I. pipe, heated by band heater, out side
- Centrifugal blower to force air through test pipe with flow Control switch
- Variac 2A, capacity to control heater input
- An orifice meter with water manometer
- Voltmeter and ammeter to measure heater input
- Multichannel digital temperature indicator to measure various Temperatures
- A technical manual accompanies the unit
Services Required:
- L Bench area of about 1. X 0.75m. At working height
- Ø 230V, 15A, AC, supply with earthing connection
Thermal Conductivity Metal Rod
Brand | SMEI |
Features:
- Reliability
- Low maintenance
- Ergonomic design
Experiments:
- To plot the temperature distribution along the length of Bar
- To determine the thermal conductivity of given bar at various temperatures
Utilities Required:
- Water supply 3 lit/min (approx.)
- Drain
- Electricity Supply: 1 Phase, 220 V AC 2 Amp
- Table for set-up support
Thermal Conductivity Insulting Powder Apparatus
Features:
- High performance
- Determination thermal conductivity
- Portable
Experiments:
- Determination of thermal conductivity of insulating powder
- Comparison of thermal Conductivity of insulating powder at different temperatures
Utilities Required:
- Electricity Supply: 1 Phase, 220 V AC, 2 Amp
- Table for set-up support
Liquid Thermal Conductivity
Features:
- Optimum performance
- Easy to use
- Maximum efficiency
Experiments:
- Determination of Thermal conductivity of different liquids and to make a comparative study
- Study of variation of thermal conductivity of different liquids with temperature
Utilities Required:
- Water supply 5 lit/min (approx.)
- Drain
- Electricity Supply: I Phase, 220 V AC, 2 Amp
- Table for set-up support
Hydraulic Bench
Some of The Quality Attributes are as Follows:
- Compact design
- Efficient functioning
- Require less maintenance
pantograph
Minimum Order Quantity: 1 Piece
Brand | SMEI |
Model Name/Number | TOM101A |
Packaging Type | Nicely packed in a box |
Additional Information:
- Item Code: TOM101A
- Production Capacity: 10
- Delivery Time: 2-3 weeks
- Packaging Details: Nicely packed in a box
Diesel Engine Test Rig
Brand | SMEI |
Experiments:
- Study of engine performance for power, efficiencies, fuel consumption, air fuel ratio and heat balance
Utilities Required:
- Electric supply Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. (Neutral – Earth voltage less than 5 VAC)
- 5A, three pin socket with switch (2 No)
- Water supply Continuous, clean and soft water supply @ 4000 LPH, at 10 m. head. Provide tap with 1” BSP size connection
- Space 3500L x 4000W x 2000H in mm
- Drain Provide suitable drain arrangement (Drain pipe 65 NB/2.5” size)
- Exhaust Provide suitable exhaust arrangement (Exhaust pipe 32 NB/1.25” size)
- Fuel, oil Diesel @10 liter, Oil @ 3.5 lit. (15W40)
Jet on Vane Apparatus
Following are Quality Attributes are as Follows:
- Sturdy design
- Easy mounting
- Durability
Diesel Engine Test Rig
Brand | SMEI |
Experiments:
- Study of engine performance for power, efficiencies, fuel consumption, air fuel ratio and heat balance
Utilities Required:
- Electric supply: Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing
- (Neutral – Earth voltage less than 5 VAC.)
- Space: Space: 3800L x 2500W x 1700H in mm
- Water supply: Continuous clean and soft water supply @1000 LPH, at minimum head of 20 m. is needed. Provide tap with 1/2” BSP size connection
- Exhaust line: Provide exhaust pipe 32 NB (1.25") size with suitable length
- Drain: Provide drainpipe 1.5” BSP size with suitable length
- Fuel, oil: Diesel: @ 10 liter. Lubricating oil: @ 5 liter (20W40)
Water Cooling Tower Apparatus
Features:
- Reliability
- Enhanced service life
- Rugged design
Expriments:
- Actual Visualization of the cooling tower operation.
- To find out mass transfer co-efficient, plot pressure drop per unit height with airflow rate
Francis Turbine Test Setup
Features:
- Low maintenance
- Hassle free performance
- Long life
Expriments:
- To study the operation of a Francis Turbine
- To determine the output power of francis turbine To determine the turbine efficiency
Ice Plant Test Rig
To serve the requisite demands of our esteemed clients, we are engaged in providing a qualitative range of Ice Plant Test Rig. This test rig is use to calculate the co-efficient of performance of unit. We customized our test rig as per market preferences. Offered test rig is checked on quality provisions for supplying a flawless range.
Features:
- Compact design
- Ease of operation
- Optimum performance
Description:
- This unit consists of a hermetically sealed compressor with air cooled condenser
- A capillary is next to condensers followed by medium temperature evaporators
- Electrical energy supplied to the compressor can be measured by energy meter
- The evaporator is immersed in the SS tank with PUF insulation
Experiments:
- The apparatus is used to perform the following experiments
- To calculate the co-efficient of performance of unit
Refrigeration Test Rig
Features:
- Sturdiness
- Occupy less space
- Precision-designed
Description:
- The experimental Refrigeration Cycle Test Rig consist of a compressor unit, condenser, evaporator, cooling chamber, controlling devices and measuring instruments those are fitted on a stand and a control panel. The apparatus is fabricated in such a way; to refrigeration system hermetically sealed compressor is fitted on stand with the help of flexible foundation bolts to minimize vibrations
- Electric power input to the compressor is given through Thermostatic switch.
Aim:
- To study Refrigeration Cycle
- Determine of Co-efficient of Performance of Cycle
- Determine of Tonnage capacity of Refrigeration Unit
Apparatus:
- Refrigeration test rig consists of compressor (Hermitically)
- Air cooler condenser, Capillary Tube, Evaporator voil with freezer
- Digital voltmeter, Digital Ampere meter, Digital rnergy Meter
- Suction pressure Gauge, Discharge pressure Gauge
- Hand shut valve, Filter dryer and figital totameter
Four Bar Mechanism
Minimum Order Quantity: 1 Piece
- Scotch Yoke Mechanism
- Locomotive Coupling
- Oldham Coupling
- Double Slider Crank Chain Mechanism
- Crank & Slotted Lever Mechanism
- Model of Belt Drive
- Cross Belt Drive
- Flat Belt Drive
- Roof Drive
- Gear Train
- Moment of Inertia of a Flywheel
Additional Information:
- Item Code: TOM101
- Delivery Time: 7-14 days
- Packaging Details: Nicely packed in a box
Forced Vortex Flow Apparatus
Scope of Experimentations:
- Fill the cylinder with water to about one half of its height
- Rotate the cylinder with constant and reasonably fast speed
- The free surface of the water takes the form of a parabolic profile
- Measure the speed of rotation
- When conditions become steady, take the surface profile readings by traversing the Pitot-static tube, immersed just beneath the water surface along a radial line The surface elevation at r0 is taken as the datum for all these readings
- Now for the second run, speed from motor has been changed and again at steady state, take the surface profile readings
Utilities Required:
- Power supply: Single Phase, 220 volts, 50 Hz, 5 Amp with earth
- Water Supply
- Drain
Technical Details:
- Do not run the pump at low voltage i.e. less than 180 Volts
- Always keep apparatus free from dust
- To prevent clogging of moving parts, pump at least once in a fortnight
- Frequently Grease/Oil the rotating parts, once in three months
- Always Use Clean Water
- If the Apparatus is not in use for more than one month, drain the apparatus completely, and fill pump with cutting oil
Vapour Absorption Refrigeration System Model
This type of refrigeration is usually used for domestic purposes only as it is complex in the construction and working. This type of refrigerator was developed in 1925 by Munster’s and Battzervan when they were studying at Royal Institute of Technology At Stockholm for their undergraduate course. This type of refrigerator was known as three fluid refrigeration system. The elimination of aqua pump from the absorption system with the complete absence of moving parts and work input. The main purpose of removing the pump was to make the machine noiseless. It uses refrigerant as a solvent s and an inlet gas for inlet of the system. The inert gas is continued to the lower side of system only by its system. It is possible to maintain the uniform pressure throughout the system and after sometime permitting the refrigerant to evaporator at low temperature corresponding to its partial pressure. In the high pressure side system (generator and condenser), there exists only the refrigerant which is subjected to total pressure of the system so that it is condensed by using normal cooling water as air as it is done in other system.
Rotary Dryer
An arrangement is made to vary and measure the airflow rate. A digital temperature controller is used to control and measure the temperature of air stream.
Experiments:
- To study the operation of a Rotary Dryer
- To study the drying characteristics of a solid material under batch drying condition in a rotary dryer
Product Details:
- Superb Painted structure
- Simple to operate & maintain
- Compact & stand alone set up
Utilities Required:
- Electric supply Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for weighing scale, 15A, three pin socket with switch for heater
- Material Saw dust @ 1Kg. Granular and free flowing solid of size I - 2 mm
- Anemometer Air flow measurement
Single Slider Crank Chain Mechanism
Minimum Order Quantity: 1 Piece
Automation Grade | Manual |
Material | Wood |
Additional Information:
- Item Code: TOM102
- Production Capacity: 10
- Delivery Time: 2-3 weeks
- Packaging Details: Nicely packed in a box